JD's Garage Micro
Next, I stood each section on it's back and bolted 2 together for each side using 2" long 1/2" bolts. Before bolting them together, I placed them where I wanted them, matched them up, and used clamps to position them in place.
Here's a photo of one of the bolts I used.
Here's a photo of the clamped together sections
Here's another after I pre-drilled 1/2" holes, and secured the bolts in place. I chose to use 5 bolts to secure the two pieces together.
Once secured I removed the clamps. Below are photos of 2 of the transition sections which, when bolted together, comprise 1/2 of the ramp's 8' wide skate-able transition frame. In the first photo, you can look closely and see where the 5 bolts are securing the two pieces together.