JD's Garage Micro
My next task was to attach and secure my coping. To do this, I used 4 3/8" toggle bolts with washers on where the bolt meets the wood to secure each 8' pipe. First, I drilled holes into the supporting 2x4's at an appropriate angle to the coping I'd be attaching I then taped my coping to the ramp and marked it at each bolt hole so I knew where to drill holes in the pipe.
Coping Attachment
In order for the toggle bolts nuts to fit into the pipe, I had to drill 1/2" holes at each of the marks I made on the coping.
Coping Attachment (Cont.)
