How to build a Mini Ramp Shed
PLYING
Figure 6: plying the tranny
now we can ply the 2 halves and the flat bottom. Lay a piece of 4mm ply horizontally across the tranny, and make sure it is just below the coping. Screw this down lay another sheet down horizontally and make sure that the top of this sheet is flush with the bottom of the first sheet cut off the access which is sticking out now lay 1 sheet of 4mm ply on vertically on the tranny structure, and screw it down screw down another sheet next to it and cut off the access do the same for the other tranny screw down 2 pieces of 4mm ply on the flat bottom use the access 4mm ply you have cut off from the plying the trannies to ply the decks
Figure 7: screwing down the ply
